Nanuk 950 Wheeled Case for DJI Phantom 3

Nanuk 950 Wheeled Case for DJI Phantom 3


  • Designed to Absorb Shocks / Protect Gear
  • Phantom 3 & Accessories Foam Insert
  • Removable Gimbal Foam Sleeve
  • Two Wheels & 2-Stage Retractable Handle
  • Impact-Resistant NK-7 Resin
  • Thick Wall Construction/Rounded Corners
  • Dustproof & Waterproof (3 ft / 30 min)
  • Nanuk PowerClaw Latching System
  • Two Padlockable Hasps Molded Into Case
  • Stackable

Buy Case

Categories: , Tags: , ,


This is a standard Nanuk 950 wheeled protective case in graphite, featuring a foam insert designed specifically for the DJI Phantom 3 Quadcopter and its accessories. In addition to the overall foam, the case also includes a removable gimbal sleeve, made of soft Polyurethane foam, for protecting your camera/gimbal from moving or shaking during transport. The case also features two Polyurethane wheels built in on one end, and a 2-stage retractable handle on the opposite end, for convenient carry everywhere. The wheels are integrated in a way that they don’t interfere when you set the case down on the ground.

Made of impact-resistant NK-7 Resin, with thick wall construction and rounded corners, the 950 case is designed to absorb shocks without sustaining any damage nor allowing damage to your gear. It is also IP67-rated dustproof and waterproof, capable of 3 ft submersion for 30 minutes. The waterproofing seal is designed to resist deformation and fatigue, ensuring a long-lasting watertight seal. The case also features Nanuk’s PowerClaw latching system, engineered to keep the case securely closed even when dropped. The PowerClaw clamps the case tightly closed using compressive force while an integrated slide lock prevents it from opening.

The 950 is equipped with two padlockable hasps molded directly into it, supporting high-quality TSA-approved padlocks, sold separately. It is also stackable, so if you’re transporting multiple Phantom 3 Quadcopters, or simply other 950 cases, you can safely stack one case on top of another during transport. The 950 also has an automatic pressure release valve, which automatically equalizes the pressure on the inside of the case.

Key Features 
  • Standard Nanuk 950 wheeled protective case with foam designed for the Phantom 3 and accessories
  • Removable gimbal foam sleeve
  • Two wheels built in on one end, and 2-stage retractable handle on opposite end
  • Made of impact-resistant NK-7 Resin
  • Thick wall construction
  • Rounded corners
  • Designed to absorb shocks with sustaining damage or allowing damage to gear
  • IP67-rated dustproof and waterproof (3 ft / 30 min)
  • Nanuk PowerClaw latching system clamps the case tightly closed
  • Two padlockable hasps molded directly into the case, supporting padlocks
  • Stackable
  • Removable lid
  • Top and bottom panel mount
    Interior Dimensions 20.5 x 15.3 x 10.1″ (52 x 39 x 25.6 cm)
    Exterior Dimensions 22.8 x 18.3 x 11.7″ (58 x 46.5 x 29.7 cm)
    Lid Depth 2.1″ (5.3 cm)
    Base Depth 8″ (20.3 cm)
    Material Case: Lightweight NK-7 resin
    Top Foam Insert: 1.5 lb (0.7 kg) Polyurethane
    Lower Foam Insert: 1.8 lb (0.8 kg) Polyethylene
    Buoyancy 110 lb (50 kg) max.
    Airline Carry-On No
    Watertight Yes, IP67
    Temperature Range -20 to 140°F (-29 to 60°C)
    Weight 16.5 lb (7.5 kg)


There are no reviews yet.

Be the first to review “Nanuk 950 Wheeled Case for DJI Phantom 3”

Your email address will not be published. Required fields are marked *

CommentLuv badge
Filmmaking Naturally uses premium CommentLuv which allows you to put your keywords with your name if you have had 5 approved comments. Use your real name and then @ your keywords (maximum of 3)